Ref. 3271
Frequency Range 0.15MHz - 1050MHz
4½ Digit Display (Center & Marker Frequency, 0.1MHz resolution)
–100 to +13dBm Amplitude Range, 20kHz, 400kHz and Video-Filter
Tracking-Generator (HM5011 only)
Frequency range: 0.15MHz - 1050MHz
Output Voltage: +1dBm to –50dBm (50Ω)
Specifications
Frequency
Frequency range: 0.15MHz to 1050MHz (-3dB)
Center frequency display accuracy: ±100kHz
Marker accuracy: ±(0.1% span + 100kHz)
Frequency display res.: 100kHz (4½ digit LED)
Frequency scanwidth: 100kHz/div. to 100MHz/div. in 1-2-5 steps and 0Hz/div.
(Zero Scan)
Frequency scanwidth accuracy: ±10%
Frequency stability: better than 150kHz / hour
IF Bandwidth (-3dB): Resolution: 400kHz and
20kHz; Video-Filter on: 4kHz Sweep rate: 43Hz
Amplitude
Amplitude range: -100dBm to +13dBm
Screen display range: 80dB (10dB / div.)
Reference level: -27dBm to +13dBm (in 10dB steps)
Reference level accuracy: ±2dB
Average noise level: -99dBm (20kHz BW)
Distortion: <-75dBc; 2nd and 3rd harmonic 3rd order intermod.: -70dBc (two
signals >3MHz apart)
Sensitivity: <5dB above average noise level
Log scale fidelity: ±2dB (without attn.) Ref.: 250MHz
IF gain: 10dB adjustment range
Input
Input impedance: 50W
Input connector: BNC
Input attenuator: 0 to 40 dB (4 x 10dB steps)
Input attenuator accuracy: ±1dB/10dB step
Max. input level: +10dBm, ±25VDC (0dB attenuation) +20dBm (40dB attenuation)
Tracking Generator
Output level range: -50dBm to +1dBm (in 10dB steps and var.)
Output attenuator: 0 to 40dB (4 x 10dB steps)
Output attenuator accuracy: ±1dB
Output impedance: 50W (BNC)
Frequency range: 0.15MHz to 1050MHz
Frequency response: ±1.5dB
Radio Frequency Interference (RFI): <20dBc
Divers
AM-Demodulator output for head-sets.
Permissible load impedance >8W
General
Display: CRT. 6 inch, 8 x 10 div. intern. graticule
Trace rotation: Adjustable on front panel
Line voltage: 115 / 230V ±10%, 50-60Hz
Power consumption: approx. 20W
Operating ambient temperature: 0°C..+40°C
Protective system: Safety Class I (IEC 1010-1)
Weight: approx. 7kg
Cabinet: W 285, H 125, D 380 mm
Accessories supplied: Line Cord, Operators Manual. Optional accessories,
50W-feedthrough termination HZ22
Viewing Hood HZ47, Near Field Probe Set HZ530, Carrying Case HZ96-2, Transient
Limiter HZ560
Evolution of the original HM5005/HM5006 has led to the new HM5010/HM5011
Spectrum Analyzer/Tracking Generator which now extends operation over 1 GHz
(frequency range 0.15 to 1050 MHz). Both fine and coarse center frequency
controls, combined with a scanwidth selector provide simple frequency domain
measurements from 100 kHz/div. to 100 MHz/Div.. Both models include a 4½digit
numeric LED readout that can selectively display either the center or marker
frequency. The HM5011
includes a tracking generator.
The HM5010/5011 offer the same operation modes as the
HM5005/5006. The instruments are suitable for pre-compliance testing during
development prior to third party testing. A near-field sniffer probe set, HZ530,
can be used to locate cable and PC board emission "hot spots" and evaluate EMC
problems at the breadboard and prototype level. The combination of HM5010/5011
with the HZ530 is an excellent solution for RF leakage/radiation detection,
CATV/ MATV system troubleshooting, cellular telephone/pocket pager test and EMC
diagnostics. There is an optional measurement output for a PC which makes
documentation of results easy and affordable with the HO500 Interface.